Your Local Electricianin Whitehaven & West Cumbria
An experienced electrician for sockets, lighting, circuits and installations, finished on time, certified and left tidy.
General Electrician
General electrical work, done properly first time
Most electrical jobs start small: an extra socket in the kitchen, outdoor lighting for the drive, a new circuit for a garden office, or a light fitting that never worked right. These jobs matter because they're the ones you live with every day. K.Maguire Electrical handles them with the same care as a full rewire.
Kieran Maguire has 18 years of trade experience across domestic, commercial and industrial properties. You speak directly to the electrician doing the work, so advice is honest and the price you're quoted is the price you pay.
This service is for homeowners, landlords, tenants with permission, and businesses across Whitehaven, Workington, Cockermouth and the wider West Cumbria area. Whether you're renovating, extending or simply fixing an annoyance, you get safe, compliant work and the paperwork to prove it.
Professional help matters because electrical work is regulated for good reason. Poor connections cause heat, fires and shocks, often months after the job was done. A NAPIT-registered electrician tests every circuit before leaving and issues certification for notifiable work, which you'll need when you sell or insure your home.
Don't leave it
What happens when electrical jobs are left or done cheaply
Small faults rarely stay small. Here's what we see when work is put off or handed to someone unqualified.
Overheating connections
Loose or undersized wiring builds heat behind walls and inside fittings, which can scorch cables and start fires.
Overloaded sockets
Extension leads and adaptors used as a permanent fix overload circuits and trip breakers at the worst moment.
Problems at sale or insurance
Uncertified work can delay a house sale, and insurers may question claims linked to non-compliant installations.
Paying twice
Cheap, uncertified jobs often have to be stripped out and redone properly, costing more than doing it right first time.
Common mistakes we see
- Using extension leads instead of adding sockets
- Hiring someone who can't certify the work
- Ignoring a fitting that buzzes, flickers or feels warm
Our process
Five clear steps from call to certificate
01
Inspection
We look at the job, the existing wiring and your consumer unit to understand what's needed.
02
Clear quote
You get a free, no-obligation price and a straightforward explanation of the work.
03
Installation
Work is carried out neatly, with dust sheets down and disruption kept to a minimum.
04
Testing
Every new or altered circuit is tested to current regulations before we leave.
05
Certification & guarantee
You receive the correct certificate, backed by the NAPIT workmanship guarantee.
The benefits
What you get with K.Maguire Electrical
One trusted contact
The electrician who quotes is the electrician who turns up and does the job.
Safer home or premises
Every connection tested, so you're not left with hidden faults behind the plaster.
Certified and compliant
Paperwork you can hand to a buyer, landlord, insurer or building control.
Tidy finish
Customers regularly mention the clean, careful finish in their reviews.
No surprises
A clear price agreed up front, with any changes discussed before they happen.
Experience that saves time
18 years on the tools means problems are spotted and solved quickly.
In detail
What our general electrical service covers
Every property is different, so here's a closer look at the types of work we carry out and how they differ between homes and businesses.
Sockets, switches and USB points
Additional double sockets, USB charging sockets, outdoor weatherproof sockets and smart switches. Where possible, new sockets are spurred or added to existing ring circuits after checking capacity; where a circuit is already loaded, a new circuit is the safer option.
Indoor and outdoor lighting
Downlights and spotlights, pendant and feature lighting, LED upgrades, under-cabinet kitchen lighting, security lights and garden lighting. Outdoor work uses suitably rated fittings and cable, with RCD protection as required by current regulations.
New circuits and appliances
Dedicated circuits for cookers, hobs, electric showers, garden offices, garages and workshops. Cable sizes are calculated for the load and run length, so circuits don't overheat or trip under normal use.
Kitchens, extensions and renovations
First and second fix wiring for new kitchens and extensions, often working alongside joiners and kitchen fitters to keep your project on schedule. Several of our reviews come from customers whose kitchen electrics were completed in a tight timeframe.
Commercial and industrial work
Shops, salons, offices and workshops need installations that suit heavier use and business hours. We plan work to keep downtime short and, for larger projects, bring in contracted labour so timescales are met.
Smart home and small installations
Video doorbells, external security lights, extractor fans, network cable runs and preparation for media walls, the smaller jobs that make a home work better.
Helpful guide
Planning electrical work: a quick guide
Start by listing everything you want done, even the small jobs. Combining an extra socket, a new outside light and a replacement fan into one visit is quicker and better value than three separate callouts, and it means circuits are planned together rather than patched one at a time.
Think about how you use each room. Where do you charge phones and laptops? Where will the TV, router and games console sit? Do you need sockets on a kitchen island or in a utility room? Getting positions right at the start avoids trailing leads and adaptors later.
If you're renovating, book the electrician early. First-fix wiring needs to go in before plastering and kitchen fitting, and second fix happens once surfaces are finished. Coordinating with other trades keeps your project on schedule — something several of our customers mention after kitchen and extension projects.
Finally, keep your certificates safe. Electrical Installation Certificates and Minor Works Certificates prove the work was tested and is compliant. You'll be asked for them when you sell, remortgage or make an insurance claim.
Ask for a free quoteHomes and businesses
General Electrician for domestic, commercial and industrial clients
At home, the priorities are safety, a tidy finish and as little disruption to family life as possible. We work around your routine, protect floors and furniture, and explain what's happening at each stage so there are no surprises when you get home.
For commercial and industrial premises, downtime costs money. Work is planned around your opening hours wherever possible, and for larger projects additional contracted labour is brought in so deadlines are met without cutting corners. Whatever the property, every job is tested and certified to current regulations.
How pricing works
We don't publish a fixed rate card because no two jobs are the same. Instead, every general electrician job is priced on enquiry with a free, no-obligation quote. You'll know the full price before any work starts, and if anything changes once work is under way, we'll talk it through with you first.
What to expect
What happens on the day
We arrive when we say we will
Punctuality comes up again and again in our reviews. If anything changes, you'll hear from us before you're left waiting.
You deal with the electrician
Kieran is on the tools, so the person who quoted is the person who answers your questions on site.
Power is managed carefully
Where circuits need switching off, we'll tell you in advance and keep the outage as short as possible.
Everything is tested
Before we leave, the work is tested to confirm it's safe and working as it should.
We leave it tidy
Dust sheets down, mess cleared away and the area left as we found it.
General Electrician across West Cumbria
Based in Whitehaven, we carry out general electrician work in Workington, Cockermouth, Gosforth, Seascale, Keswick, St Bees, Wigton, Carlisle and the villages in between. Being local means we know the area's housing stock, from older terraces and farmhouses to new builds and commercial units, and can plan work that suits the property.
FAQs
General Electrician: your questions answered
How much does an electrician cost in Whitehaven?
+
Every job is priced on enquiry because the work varies so much. You'll get a free, no-obligation quote with a clear price before anything starts.
How quickly can you start?
+
It depends on the current workload and the size of the job. Call 07752 803650 and we'll give you an honest start date when we quote.
Do I get a certificate for the work?
+
Yes. Notifiable work is certified, and all new or altered circuits are tested before we leave.
Do you work on commercial properties?
+
Yes. We carry out domestic, commercial and industrial electrical work across Cumbria.
Which areas do you cover?
+
We're based in Whitehaven and cover Workington, Cockermouth, Gosforth, Seascale, Keswick, St Bees, Wigton and Carlisle.
Is the work guaranteed?
+
Yes. K.Maguire Electrical is NAPIT registered and workmanship is guaranteed through NAPIT, so you are protected even after the job is signed off.
Are you insured?
+
Yes. We hold £2,000,000 public liability insurance and £250,000 professional indemnity insurance, so your property and the work are covered.
Do you offer emergency call-outs?
+
Our standard hours are Monday to Friday, 8am to 4:30pm, and we're on the line 24/7 for emergencies. Call 07752 803650 and explain the problem.
How do I get a quote?
+
Call 07752 803650 or send a request through our contact page with a short description of the job. We'll arrange a convenient time to look at the work and give you a free, no-obligation quote with a clear price.
Is the quote really free?
+
Yes. Every quote is free and comes with no obligation. You get a clear price before any work starts, so there are no surprises on the invoice.
Get your electrical job sorted properly
Free, no-obligation quote. NAPIT registered, fully insured and backed by a NAPIT workmanship guarantee.